| Engine | Model & type | Cummins NTA855-C360S10; In-line, water-cooled; 4-cycle,
overhead valve direct injection, turbocharged diesel |
| Rated revolution | 2000 rpm |
| Horsepower | Gross power: 257/345/2000 kW/HP/rpm //
Net power: 235/320/2000 kW/HP/rpm |
| Number of cylinders | 6—139.7 x 152.4 (mm x stroke) |
| Piston displacement | 14010 ml |
| Min. fuel consumption | 245 g/kW·h |
| Maximum torque | 1440 N·m@1400rpm |
| Power transmission system | Torque converter | 3-element, 1 stage, 1 phase |
| Transmission | Planetary gear, multi-disc clutch, power shift, forced lubrication |
| Main drive | Spiral bevel gear, splash lubrication, single-stage speed reduction |
| Steering clutch | Wet, multi-disc, spring loaded, hydraulically separated, hydraulic control |
| Steering brake | Wet, floating band, foot brake with hydraulic booster |
| Final drive | 2-stage speed reduction of spur gear, splash lubrication |
| Travel speed | Gear | 1st | 2nd | 3rd |
| Forward | 0~3.6 km/h | 0~6.6 km/h | 0~11.5 km/h |
| Reverse | 0~4.4 km/h | 0~7.8 km/h | 0~13.5 km/h |
Undercarriage
system | Type | Swing type of sprayed beam, suspended structure of equalizer bar |
| Carrier rollers | 2 each side |
| Track rollers | 7 each side (single flange 5, double flange 2) |
| Track type | 41 each side |
| Width of track shoes | 560 mm |
| Pitch | 228.6 mm |
Hydraulic
System | Maximum pressure | 14 MPa |
| Pump type | Gear pump |
| Discharge (at revolution of 2000 rpm) | 355 (1795 rpm) L/min |
| Bore of working cylinder × no. (double-acting type) | 140 mm × 2 |
| Blade | Blade Type | Straight-tilt | Angle | Semi-U blade |
| Dozing capacity | 10 m 3 | 6 m 3 | 11.9 m 3 |
Efficiency
(Theoretical value 40 m) | 580 m 3 /h | 350 m 3 /h | 690 m 3 /h |
| Blade width | 4130 mm | 5000 mm | 4130 mm |
| Blade height | 1590 mm | 1140 mm | 1710 mm |
| Maximum drop below ground | 560 mm | 630 mm | 560 mm |
| Maximum tilt adjustment | 1000 mm | 500 mm | 1000 mm |
| Weight of blade | 4520 kg | 4932 kg | 4924 kg |
Riipper
(Optional) | Maximum digging
depth of 3-shank ripper | 842 mm |
| Maximum lift above ground | 883 mm |
| Weight of 3-shank ripper | 3802 kg |
Maximum digging
depth of single ripper | 1250 mm |
| Maximum lift above ground | 965 mm |
| Weight of single ripper | 3252 kg |
